Products
Resin Rhinestones Molding Silicone
Category:
Inquiry
Product Description
Description
This product is a two component liquid silicone rubber with good dimensional stability and good mold release, which can be cure at room temperature by a condensation reaction or heated at 250°C.this liquid silicone rubber is eco-friendly, non-toxic and odorless, it is a environmental material will be used all over the world in the future.
Features
1.high transparent and good yellowing resistance
2. Superior mechanical properties,and excellent tear and tensile strength
3.Injection silicone, Injection silicone rubber
4.Food grade silicone (environmental,odorless and nontoxic)
5.Both the liquid silicone and the formed products are odorless
6.Outstanding bubble releasing
Application
This type of silicone rubber is suitable for making silicone mold for resin rhinestones, jewelry, crystal, shearing-off resin, diamond, artificial jewelries, rapid prototyping and so on.
G series of addition molding high transparent mold silicone rubber parameters (25℃)
|
Model
|
G815
|
G820
|
G825
|
G830
|
G840
|
|
Color
|
high transparent
|
||||
|
Hardness (Shore A°)
|
15±2
|
20±2
|
25±2
|
30±2
|
40±2
|
|
Two-component mixing weight ratio (A:B)
|
1:1
|
1:1
|
1:1
|
1:1 or 10:1
|
1:1 or 10:1
|
|
Dynamic viscosity（mPa.s）
|
9000±1000
|
12000±2000
|
14000±2000
|
16000±2000
|
45000±5000
|
|
Tensile strength（MPa)
|
3.2
|
3.2
|
3.3
|
3.3
|
3.1
|
|
Tear strength（kN/m）
|
8±2
|
9±2
|
8±2
|
8±2
|
7±2
|
|
Elongation（%）
|
460
|
460
|
420
|
420
|
170
|
|
Density（g/cm³）
|
1.05
|
1.05
|
1.07
|
1.13
|
1.14
|
|
Operating time （min)
|
20-40
|
20-40
|
20-40
|
20-40
|
20-40
|
|
Vulcanization time（h)
|
3-5h（25℃）20-30min（60℃）
|
||||
|
Linear shrinkage rate（%）
|
《0.1
|
《0.1
|
《0.1
|
《0.1
|
《0.1
|
Packaging
Metal drum or plastic drum: 20kg, 25kg and 200kg
Attention
1. The rubber material should be sealed and stored, and the mixed rubber material should be used up within the specified time to avoid waste
2. Do not let the rubber material and contain nitrogen (N), sulfur (S), phosphorus (P), tin (Sn), lead (Pb), mercury (Hg). Contact with alcohols, water, etc., such as organotin compounds and silicone rubber containing organic tin. Sulfur, sulfide, sulfur-containing rubber, amine compounds, and ammonia-containing materials. Also, do not contact containers or molds that contain condensation rubber. , Otherwise, the addition molding liquid silicone will be sticky, incompletely cured or even not cured
Keywords.
Resin Rhinestones Molding Silicone
Hot Products
INQUIRY