NEWS
Technical introduction of Wholesale liquid silicone rubber molding
Release time:
2023-04-27 10:02
Wholesale liquid silicone rubber molding technology is a high-precision, high-efficiency molding method that can be used to manufacture various types of silicone parts. The technology is designed for applications requiring exceptional heat resistance, weather resistance, and biocompatibility. Wholesale liquid silicone rubber molding technology is to inject liquid silicone rubber into the mold and cures it under high-temperature conditions, so as to realize the precise general and mass production of parts with complex shapes.
The process flow of Wholesale liquid silicone rubber molding technology: the first step: making the mold. According to the drawings and specification requirements of the required parts, the corresponding molds are made. The making of molds requires a high degree of precision and stability.
Wholesale liquid silicone rubber molding tells you the second step: prepare liquid silicone rubber. The preparation of liquid silicone rubber requires certain skills and must be precisely dosed according to the formula provided by the manufacturer to achieve the correct viscosity, curing time, and hardness. Step Three: Injection. Inject the silicone into the mold, and put the mold into the heating chamber for heating to promote the curing of the silicone. Step 4: Take out the parts. After the silicone rubber has cured, remove the part from the mold.
Through the above analysis of the technical introduction of Wholesale liquid silicone rubber molding, hope it helps you.
Related News