NEWS
Customized Tin cure silicone supplies introduce silicone
Release time:
2023-03-09 09:48
Customized Tin cure silicone supplies tell you that the silicone curing agent is a polycondensation type two-component silicone rubber (RTV-2) crosslinking agent, and the crosslinking time can be adjusted through the mixing ratio. Customized Tin cure silicone supplies tell you the precautions when using it. After the silicone curing agent is added to the mold silicone, it must be stirred evenly. If it is not stirred evenly, some parts will not be cured.
Customized Tin cure silicone supplies tell you that if the material cannot be cured after 48 hours, the mold will be declared scrapped, and it will not be cured. You can only clean it up and make a new mold.
Customized Tin cure silicone supplies tell you that this material is characterized by a white, slightly yellowish paste, which is a diacyl organic peroxide. Used as a vulcanizing agent for extruding silicone rubber, the product has high strength and good transparency. Reference crosslinking temperature and dosage (depending on different rubber types and product requirements): temperature > 90°C; dosage: 1-2.5%. Soluble in benzene solvents, insoluble in water, ethanol, etc.
Through the above introduction and analysis of Customized Tin cure silicone supplies, hope it helps you.
Related News