NEWS
Description of the RTV Silicone Rubber for Molding
Release time:
2022-08-30 17:15
RTV Silicone Rubber for Craft Mold generally use condensation silicone rubber, which is called two-component room temperature vulcanization silicone rubber, with excellent fluidity and good operational performance and is generally named two-components silicone rubber, Part A and part B. RTV Silicone Rubber features an exceptional fluidity and good operability. The mixing ratio is 100:2, mainly be suitable for making molds application.
Features of the RTV Silicone Rubber. 1. Good fluidity, easy to drain bubbles, easy to infuse, easy to operate and easy to demould. 2. Fast curing at room temperature 3. High tensile and tearing strength, low linear shrinkage (<0.3%) .
4. There are many times of mold reversal of the RTV Silicone Rubber (for example, the number of copies of plaster products can reach 800 to 1000times). 5. Good waether resistance, high temperature resistance, acid and alkali resistance and aging resistance.
Through the above introduction and analysis of the Description of the RTV Silicone Rubber for Molding, hope it helps you.
preceding page
Related News